Choosing the Best Meat for Hamburger Patties (2024)

When it comes to making an amazing burger, ground beef is the popular choice of meat. But there are others. You can even mix and match your meats! But first, to make the best burger, there are several factors to consider:

Percentage of Fat

This is one of the big ones. Fat provides moisture and flavor to the meat, and when you're cooking over a hot grill, fat helps prevent the burger from drying out. The optimal fat content for burgers is 15 to 20 percent.

This means we can rule out quite a few different cuts of meat whose fat content is too low. Round and sirloin, for instance, are too lean to make good burgers.

Beef chuck happens to fall right in the sweet spot of 15 to 20 percent fat (sometimes you'll see it marketed the other way round, as in 80 to 85 percent lean, or simply 80/20, 85/15, and so on). Its deep beefy flavor with ample, but not excessive, fat makes ground chuck the best meat for burgers.

Coarse Grind

Coarse grind refers to the setting on the grinder attachment that is used to grind the meat. A coarse grind means the meat is ground using plates with larger holes in it, producing a coarser texture.

You'll almost always get a coarse grind with store-bought ground beef and pork. It's with ground turkey and chicken that you might run into a finer grind, because ground poultry tends to include more cartilage, and the finer grind helps make those bits more palatable. Still, a finer grind produces a mushy texture. The meat is not so much ground as it is extruded into almost a paste. Needless to say, this is not a desirable texture for a burger.

Forming the Patty

Along with shaping the patty, here is where you'll introduce any additional ingredients, such as the requisite salt and pepper;along with chopped onions, garlic, fresh or dried herbs and so on.

While it can be tempting to load the meat with seasonings and flavoring ingredients, don't go overboard. Too many additions, particularly if the pieces are on the large side, will weaken the patty, causing it to fall apart on the grill when you try to turn it.

And when you form the meat into a patty, do it gently. Packing the patty tightly will produce a hard burger.

Mixing Meats

Just because chuck is the best meat doesn't mean it's the only meat. You can use ground round to make a burger, but to boost the fat content try combining it with ground pork, which has a fat content of 20 to 25 percent. Not only will the additional fat balance out the leanness of the round, but it will also contribute a lovely porky flavor, making it almost like a bacon burger.

You can use this trick with ground turkey or chicken as well. Both of which are too lean to make good burgers on their own.

Another trick is if you grind your own meat. Buy somepork fatback from your butcher and add it to the grinder along with your leaner beef or poultry. Again, whatever you need to do to achieve that 15 to 20 percent fat content. For a spicy kick, consider one part ground sausage for three parts ground beef.

Grilling Your Patty

Unlike a steak, which is best cooked medium-rare (or at most medium), a burger needs to be cooked somewhere in the vicinity of medium-well to well(which corresponds to an interior temperature of 150 to 160 F). This is all well and good, but the trick is cooking it to the required interior temperature without cooking the exterior to a blackened shell.

To pull this off, make sure that you cook them over a medium-temperature grill, rather than a high one. Indirect heat can also help, especially when it comes to preventing flare-ups caused by dripping fat.

All the Fixings

To complete your burger, think of "the fixings" in terms of the following three elements: cheese, condiments, and toppings.

Cheese should be melted directly on the patty during the last minute of cooking. American, cheddar, blue, goat, Havarti, pepper jack, and brie are all excellent choices. Choose one!

Condiments can include anything from ketchup, mustard, and mayo to BBQ sauce, Russian dressing, steak sauce, and truffle aioli, to name just a few. But more than three is usually overkill. To keep the bun from falling apart, apply condiments to the top half of the bun only (or the top of the toppings stack).

When it comes to toppings, the rule of three also applies, but consider some of the following, listed in order of where you would stack them, from top to bottom:

  • Sauerkraut: drain well
  • Pickles: sliced thinly
  • Jalapeños: go easy
  • Mushrooms: grilled portobellos
  • Caramelized onions: cooked slowly
  • Bacon: crispy but not crumbly
  • Fried egg: crisp edges
  • Chili: directly atop the cheese

How to Make Hamburger Patties

Choosing the Best Meat for Hamburger Patties (2024)

FAQs

Choosing the Best Meat for Hamburger Patties? ›

Selecting the best meat for burgers

What is the best meat to use for hamburger patties? ›

Chuck is the most commonly used cut of beef in burger blends. Marbled throughout and well-balanced in flavor with a decent lean-to-fat ratio, chuck steak is generally the primary cut used in burger blends and is supplemented with one or two other cuts of meat. Sirloin or Tri-Tip.

What cuts of beef make the best hamburgers? ›

Chuck. Ground chuck is among the most popular burger cuts and makes up a good deal of prepackaged ground beef. This cut comes from the shoulder of the cow, providing a flavorful mix of muscle and fat. It's often found as an 80/20 mix, which makes it among the best beef for juicy burgers.

How do you pick good hamburger meat? ›

80 percent lean ground chuck (from the chuck roast, a neck/shoulder cut), is Canal House's pick, for its juiciness and flavor. Choose rosy-red meat with defined white flecks of fat, and for burgers, try to get your hands on a medium-grind rather than finely ground (the supermarket standard).

What is the best store bought meat for burgers? ›

Sirloin. Sirloin cuts are amply marbled and full of beefy flavor. When you want the flavor of the patty to stand out, go with top sirloin, tri-tip, or knuckle.

What is the best ground meat mix for burgers? ›

A good basic mixture would be to use 50% chuck (the cheap and lean), 25% rib plate (the fatty parts) and 25% brisket (the fatty and beef flavor). Alternative cuts that make a damn good burger without emptying your wallet are round (lean) and navel (the fatty beef belly).

What beef does mcdonalds use for burgers? ›

Ingredients: 100% Pure Beef. No additives, fillers, binders, preservatives or flavour enhancers. Just pure forequarter and flank. A little salt and pepper is added to season after cooking.

What is the most tender hamburger meat? ›

When it comes to tender beef cuts, the chuck tends to reign supreme. This area, which is found around the shoulder and neck, contains a ton of connective tissue. And, when you turn this cut into a ground mince it yields the perfect ratio of fat to lean meat.

What is the most flavorful ground beef? ›

80% lean ground chuck (shoulder) will be the juiciest and most flavorful. It's also the grind I recommend for making burgers for the grill. It has the perfect fat-to-meat ratio. These burgers will still be juicy when grilled to the recommended internal temperature of 160 degrees.

What is the highest quality ground beef? ›

80/20: Ground Chuck

Ground chuck is 80 to 85 percent lean (15 to 20 percent fat). It's the highest lean-to-fat ratio in the specialty grinds and tends to be quite tender and juicy. Ground chuck is from the shoulder of the cow. It is rich and tender with plenty of flavor.

What is the best meat for burger patties? ›

Beef chuck happens to fall right in the sweet spot of 15 to 20 percent fat (sometimes you'll see it marketed the other way round, as in 80 to 85 percent lean, or simply 80/20, 85/15, and so on). Its deep beefy flavor with ample, but not excessive, fat makes ground chuck the best meat for burgers.

What is the best burger meat to buy at the grocery store? ›

Short rib provides some good tenderness and has great flavor. Brisket is a tougher and leaner cut, but also has phenomenal flavor and will add a unique texture to your burger mix. Kidney tallow is the best beef fat you can find (if you can) and you're going to want a lot of fat in that burger.

Is angus beef good for burgers? ›

Not only are the cattle considered to be the top breed, but the meat is phenomenal, too. If you want a mouthwatering burger, then you need to get certified angus beef on it. It's got the best taste, texture, marbling, thickness, and visual appeal of any beef on the market.

What kind of hamburger meat does McDonald's use? ›

Every one of our McDonald's burgers is made with 100% pure beef and cooked and prepared with salt, pepper and nothing else—no fillers, no additives, no preservatives. We use the trimmings of cuts like the chuck, round and sirloin for our burgers, which are ground and formed into our hamburger patties.

What is the best ground beef for burgers lean or medium? ›

The options are Lean, Extra Lean or Medium – which do you choose? It's up to you – if you are concerned about fat, then make the lean choice, but keep in mind, adding in an egg and bread crumbs helps keep these lean burgers moist and more flavourful. Try Medium for maximum flavour and juiciness.

Is beef or chuck better for burgers? ›

Select your Meat

Chuck is your classic burger meat and is usually the most flavorful, simply because it has the most fat. Ground round is the leanest of the three, with sirloin in the middle range. Sirloin has a great flavor, but it is the most expensive.

Top Articles
Latest Posts
Article information

Author: Zonia Mosciski DO

Last Updated:

Views: 6251

Rating: 4 / 5 (71 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Zonia Mosciski DO

Birthday: 1996-05-16

Address: Suite 228 919 Deana Ford, Lake Meridithberg, NE 60017-4257

Phone: +2613987384138

Job: Chief Retail Officer

Hobby: Tai chi, Dowsing, Poi, Letterboxing, Watching movies, Video gaming, Singing

Introduction: My name is Zonia Mosciski DO, I am a enchanting, joyous, lovely, successful, hilarious, tender, outstanding person who loves writing and wants to share my knowledge and understanding with you.